Drawer System Components These are the components used to build the Drawer System , and are available separately.

1/4-20 Fiber Optic Holder This device holds a 2-cable Fiber Optic Connector The part is shown installed on part of a 1/4-20 Probe Holder (available separately) for clarity. each $50.00

Ethernet Connector This device provides ethernet connection ({1 or 2} x {4,6 or 8}) The part is shown installed on 2 1/4-20 Probe holders (available separately) for clarity. $50.00 each

Bed Plate This is a blank sheet of G-10 can be customized for a custom fit for one or more UUTs. It comes per-drilled to fit the Drawer Extension The Bed Plate can also be drilled for pogo-pins, perhaps for making contacts to an edge-connector in an 8- or 16-PC Board parallel setup (boundary scan). We also do customization.  E-mail for Quote The plate then bolts to the Drawer Extension 2 Sizes available    3/8"thick       1/2" thick - 10" x 24"wide     $150.00          $225.00 - 25" x 24" wide    $ 400.00         $525.00

Connector Plate This is a blank sheet of G-10 that is used to hold various connectors (Ethernet, power, RS-232, USB, Fiber Optic, RF, etc.) The result looks like the logo at the upper left of this page. We also do customization.  E-mail for Quote The plate then bolts to the Drawer 2 Sizes available    3/8"thick       1/2" thick - 6" x 19"wide     $150.00          $225.00 - 8" x 19" wide    $ 400.00         $525.00

Sometimes, only certain parts are needed, not the complete assembly.  Consequently, we also offer the Drawer and the Drawer Extension separately. A very custom example of why this might make sense is when a dedicated system to test PC Boards using Boundary Scan is to be built.  A Drawer may be mounted directly on a customized Bed Plate for a substantial cost savings.  Choose the 25"x24"x1/2" bed plate and mount it on thick rubber feet. Purchasing one of each allows a Drawer System to be built, but buying a Drawer System in the first place is cheaper.

The Drawer Extension The Drawer Extension provides a platform for the Drawer and a test unit. The Drawer Extension comes with what you see here. See "The Drawer System" for more information. $1,400.00 as shown

The Drawer The Drawer is the rectangular metal frame, plus mounting accessories, lever, and plate. It is shown unmounted. There are several holes in the base plate that are used for mounting custom plates. See "The Drawer System" for more information. $1,850.00 as shown

Drawer System expansion parts Do you need metric?  Tell us:  info@mousetrap-solutions.com

Functional test, functional test systems, functional test solutions, system integration, factory automation, test fixtures, test fixturing, manufacturing test, production test, boundary scan, fixtures, fixturing

Mousetrap      Drawer Parts